Table of Contents
Advertisement
Exploded View/Disassembly&Assembly Instructions
5
1. Combine slide upper and lower from top
side after sliding up.
2. And push the edge side for locking.
3. FPCB should be put into the lower hole.
7
1. Put the 2 screw caps on screw hole.
2. Put the main keypad on front cover.
3. Put the 2 kind of side key after putting the
shield can.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1. Fasten screws at 6 points with driver after
sliding up.
8
1. Combine LCD connector and key connector
to main-PBA.
2. Put main-PBA and intenna on front cover.
5-8
- Quick Links:
- Block Diagrams
Hide quick links:
Advertisement
Table of Contents
