Setup Menu; Setting The Time - Samsung 4 series User Manual

Audio Language
t
(digital channels only)
Change the default value for audio languages.
✎
The available language may differ depending on the
broadcast.
Multi-Track Sound (MTS)
(analog channels only)
FAV.CH
Mono : Choose for channels that are
■
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Stereo : Choose for channels that are
■
broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program,
■
which is usually a foreign-language translation.
S.MODE
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
GUIDE
Night : This mode provides an improved sound
■
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and buttons will not operate and the
MUTE
sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you
should use these settings.
x
TV speaker: Off External speaker: On
✎
When Speaker Select is set to TV Speaker, you
should use these settings.
x
TV speaker: On External speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format : During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay
■
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
FM Transmitter
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
MTS Connecting a FM Transmitter
✎
Not available in some locations.
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
✎
For more detailed information, refer to "
Setup". (P. 30)
CC
Insert FM Transmitter Module into the Socket which is
located at the side of TV.
FM Transmitter (Off / On):
■
FM Frequency:
■
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setting the Time

¦
O
m → Setup → Time → ENTERE
MENU
Time
Clock : Setting the clock is for using various timer
■
features of the TV.
O
The current time will appear every time you press
the INFO
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
– Auto : Set the current time automatically using the
time from the digital channel.
✎
The antenna must be connected in order to set
the time automatically.
: Correct audio-video sync problems, when
FM Transmitter
TV Side Panel
FM Transmitter
Turns FM transmitter on/off.
Sets FM transmitter frequency.

Setup Menu

button.
17
English