Samsung SGH-D900 Service Manual page 68

5
1. Remove the insulation tape. (Blue)
2. And separate LCD connector from Main-PBA.
(Red)
7
1. Loosen a screw 4 point form Lower.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
6
1. Open the slide. (Slide up)
2. Remove the 4 screw caps with pinset.
8
1. Make the space between slide upper and
slide lower using assembly stick.
2. And then widen space with hand and
separate 2 parts.
11-5