Installing the Stand
¦
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the
N
screws. Applicable to 32inch models only.
1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
N
Make sure to distinguish between the front and back of the stand when assembling
N
them.
To make sure the TV is installed on the stand at a proper level, do not apply excess
N
downward pressure to the upper left of right sides of the TV.
. Fasten screws at position 1 and then fasten screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV
N
placed down, it may lean to one side.
Disconnecting the Stand
¦
1. Remove four screws from the back of the TV.
. Separate the stand from the TV.
Two or more people should carry the TV.
N
. Cover the bottom hole with the cover.
Assembling the Cables
¦
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
English - 80
Back
Front
2
1