Remote Management; Tools; Restart - Planet WRT-410A User Manual

Super g wireless broadband router

Hide thumbs Also See for WRT-410A:

Table of Contents

Trap Receiver: Type the name of the destination PC that will receive trap messages.

3.6.2 Remote Management

This screen enables you to set up remote management. Using remote management, the WRT-410A can

be configured through the WAN via a Web browser. A user name and password are required to perform

remote management.

HTTP: Enables you to set up HTTP access for remote management.

Enable: Click to enable or disable HTTP access for remote management.

Remote IP Range: Type the range of IP addresses that can be used for remote access.

Allows to Ping WAN Port: This function allows remote users to ping WRT-410A WAN port IP address.

Enable: Click to enable or disable WAN port pinged function.

Remote IP Range: Type the range of IP addresses that can ping from remote locations.

UPNP Enable: Click to enable or disable UPNP.

Gaming mode: If you are experiencing difficulties when playing online games or even certain

applications that use voice data, you may need to enable Gaming Mode for these applications to work

correctly. When not playing games or using voice applications, it is suggested to disable Gaming Mode.

PPTP: Click to enable or disable PPTP passthrough.

IPSec: Click to enable or disable IPSec passthrough.

Click Restart to restart the system in the event the system is not performing correctly.

- 29 -

Table of Contents