Change The Road Types Used In Route Planning - Motorola MOTONAV User Manual

Step 5 Tap BACK to use the selected route planning method and to return to the previous screen.
Your MOTONAV software recalculates the new route and shows it using an orange line.
Note: If you're in pedestrian mode and you forget to change back to a car mode, the software notices
that your speed that is too fast for a pedestrian. You can switch back instantly to car mode.

change the road types used in route planning

You can recalculate the active route using different road types. For example, you may want to avoid
highways if you are towing another vehicle.
Note: Excluding a road type is a preference. It does not necessarily mean total exclusion. If your
destination can only be accessed using some of the excluded road types, they will be used but
only as much as necessary. In this case a warning icon appears on the Route Information
screen, and the part of the route not matching your preference appears in a different color on
the map.
Step 1 From the Map screen, tap MENU.
Step 2 Tap MY ROUTE.
Step 3 Tap ROUTE SETTINGS.
Step 4 Tap a road type. (You might need to scroll the list for all road types.).
Step 5 Tap BACK to use the selected route planning method and to return to the previous screen.
Your MOTONAV software recalculates the new route and shows it using an orange line.
27 navigate
Include toll roads.
Include highways.
Include roads that require a pay pass.
Include unpaved roads (excluded by default).
Include ferries (included by default, may require a fare).
Include carpool & high-occupancy lanes.
MOTONAV Software User's Guide