Table of Contents
Advertisement
Connecting Your Set-top
4
Instructions and diagrams are included for the following connections:
•
High-Definition Television (HDTV)
•
A/V receiver — Audio
•
Standard-Definition TV (SDTV)
•
Standard-Definition TV (SDTV) and VCR/DVD Recorder
•
A/V receiver, Standard-Definition TV (SDTV), and VCR/DVD Recorder
Before you move or change components on your entertainment system, review the
following:
•
For basic cable connections, use 75 ohm coaxial cables equipped with F-type
connectors.
•
Disconnect power from your equipment before connecting or changing cable
connections.
For information on connecting to an HDTV, see Video Connection Options.
Video Connection Options
The set-top offers several different video connection options. Component video, HDMI,
and IEEE-1394 allow you to view both High-Definition and Standard-Definition TV
programming. Composite video allows you to view only Standard-Definition TV
programming. HD programming will be down-converted to SD format for SD outputs.
To determine whether your TV features component video, HDMI, IEEE-1394, or
composite video, check the manual supplied with your TV.
Use the guidelines below to determine the best video connection for your home
entertainment system.
Note: Only (1) video connection to the TV is required. HD video can only be viewed with
HDMI, IEEE-1394, or component video connections. IEEE-1394 is available with the
DCX3300 and DCX3300-M only.
HDMI or IEEE-1394 — HDTV and SDTV
HDMI and IEEE-1394 offer higher quality HD video than component video.
If your TV has an HDMI input, this is for both audio and video. Connect a Standard HDMI
cable to the TV and to the HDMI connector on your set-top.
HDMI and IEEE-1394 outputs provide video and audio, so no separate audio connections
are required if you plan to use your TV's speakers as the primary audio source.
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
365-095-14427 x.2
Connecting Your Set-top
B
9
Hide quick links:
Advertisement
Table of Contents
