Honda 2010 Accord Crosstour Owner's Manual page 377

Changing a Flat Tire
PLASTIC COVER
6. The spare tire is stored
underneath the cargo area.
Remove the plastic cover on the
cargo area lining to access the
shaft for the spare tire holder.
The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the holder shaf t. Do not use any other
tool.
374
WHEEL NUT WRENCH
7. Attach the short end of the wheel
nut wrench to the spare tire holder
shaft. Turn the wrench
counterclockwise until the shaft
loosens. Then attach the longer
section of the wrench to the shaft,
and turn it until you can see the
spare tire (about 65 70 rotations).
Do not turn the wrench any
further once you feel resistance.
2010 Accord Crosstour
SPARE TIRE HOLDER
SPARE TIRE
8. Lift up the spare tire holder, then
slide the hook and lift down the
spare tire holder.
9. Remove the spare tire from the
spare tire holder.
HOOK