Replacing Rear Bulbs - Honda 2010 Accord Crosstour Owner's Manual

BULB
SOCKET
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.
Tighten the screw securely.
2010 Accord Crosstour

Replacing Rear Bulbs

COVER
Open the tailgate. Place a cloth on
1.
the edge of the cover to prevent
scratches. Remove the covers by
carefully prying on the edge with a
small flat-tip screwdriver.
Lights
CONTINUED
349