Honda 2011 CIVIC COUPE Owner's Manual page 108

Seats
To release the seat-back, pull the
release under the trunk panel. Push
the seat-back down, then let go of
the release.
For 60/40 split rear fold-down seat
models, a release is located on each
side of the trunk.
For full rear fold-down seat models,
the release is located on the driver's
side of the trunk.
102
Make sure that the folded seat-back
does not press against the front
passenger's seat, as this could cause
the weight sensors to work
improperly.
If the rear head restraints get caught
on the front seat backs and you
cannot fold down the rear seat-back
fully, you can remove the head
restraints (see page
Make sure the removed head
RELEASE restraints are securely stored.
To lock the seat-back upright, push it
firmly against the trunk panel. Make
sure it is latched in place by pulling
on the top of the seat.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
back, and the center shoulder belt is
re-positioned in the guide whenever
the seat-back is in its upright position.
Be sure there are no twists in any
shoulder belt.
Do not put any heavy items on the
seat-back when it is folded down.
99 ).
Make sure all items in the trunk, or
items extending through the opening
into the back seat, are secured.
Loose items can fly forward and
cause injury if you have to brake
hard. See
263
Never drive with the seat-back
folded down and the trunk lid open.
See
page
Carrying Cargo on page
.
Carbon Monoxide Hazard
52 .
on