Acura 2009 TSX Owner's Manual page 464

Main Menu Table Of Contents
JACKING POINT
8. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
EXTENSION
WHEEL NUT WRENCH
9. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
10. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
2009 TSX
Changing a Flat Tire
BRAKE HUB
11. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
CONTINUED
461