Table of Contents
Advertisement
Main Menu
Table Of Contents
Playing a Disc (Models without navigation system)
The display shows up to about 16
characters of selected text data (the
folder name, file name, etc.).
If the text data has more than 16
characters, you will see the first 15
characters and the
indicator on
the display. Press and hold the
TITLE button until the next 16
characters are shown. You can see
up to about 31 characters of the text
data.
If you press and hold the TITLE
button again, the display shows the
first 15 characters again.
If any letter is not available, it is
replaced with '' . '' (dot) in the display.
When the disc has no text data, you
will see ''NO INFO'' on the display.
192
You will also see some text data
under these conditions:
When a new folder, file, or track is
selected.
When you change the audio mode
to play a disc with text data or in
MP3 or WMA.
When you insert a disc, and the
system begins to play.
When playing a CD-DA with text
data, the album and track name are
shown in the display. With a disc in
MP3 or WMA, the display shows the
folder and file name.
When you turn on the audio system
next time, the system keeps your
selection with the TITLE button.
2009 TSX
To Change or Select Tracks/Files
Use the SKIP bar while a disc is
playing to select passages and
change tracks (files in MP3 or WMA
mode).
In MP3 or WMA mode, use the
FOLDER bar (CATEGORY bar on
models with XM satellite radio) to
select folders in the disc and use
either side of the skip bar to change
files.
Advertisement
Chapters
Table of Contents
