Switching Display Mode Automatically - Acura 2010 TSX Navigation System Manual

System Setup

Switching Display Mode Automatically

I
llumination control
Display Mode button
(see page 11)
Dash illumination adjustment
knob (see your Owner's
Manual for location)
Headlights (Auto/On/Off)
Map Day/Night screen color
choice (see page 113 for the
Day and Night color choices)
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner's Manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see your Owner's Manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see
page 113). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
• Remember that once the Display mode button
vehicle is restarted.
NOTE:
See your Owner's Manual for additional information regarding the dash brightness adjustment.
114 Navigation System
Priority Operation
Allows selection of Day, Night, or Off display
1
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
2 When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
When turned on, the display changes to Night
3
display mode. The previous two controls listed
above can "cancel" this function.
N/A The user can select the color of the screen that
will be displayed for the Day and Night
display modes described above.
is selected, the other display mode controls are overridden until the
2010 TSX
But remember
Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.
Adjust the dash brightness back to mid-range
to allow auto switching by sensing the
headlights are on or off.
Use the Display Mode button
adjust the dash illumination to full bright to set
the display to your desired choice.
For best contrast, ensure that the map color is
white for Day and black for Night.
, or