Manual Channel Number Allocation - Philips VR685 User Manual

Automatic Channel Allocation FOLLOW TV
With this function the video recorder maintains the same
programme sequence as on the TV set. This only functions if
the video recorder (socket
nected with a scart cable. Additional equipement connected
to socket must be switched off.
EXT.2
1
Switch on the TV set.
2
Select programme number '1' on the TV set .
3
Press the
AUTOINSTALL
4
Select 'F TV' (FOLLOW TV) in the display, or 'FOLLOW TV'
on the TV screen, using the
Confirm with the button.
OK
If the video recorder recognizes that the TV set has been
connected with a scart cable, 'TV01' appears in the
display.
5
Confirm with the button on the video recorder-remote
OK
control. The video recorder compares the TV channels on
the TV set and the video recorder.
If the video recorder found the same TV channel as the TV
set, then it stores it at 'P 01'.
6
Wait until e.g.: 'TV02' appears in the display.
7
Select, on the TV set , the next programme number,
e.g.: '2'.
8
Confirm with the button on the video recorder-remote
OK
control.
9 6 8
Repeat steps to
allocated.
To finish, press the STANDBY m
Note: When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated automatically.
Then read further in the next paragraph: 'Manual channel
number allocation'.
* If you allocated the wrong TV channel at step
you can go back one step with the
6
) and the TV set are con-
EXT.1
button on your video recorder.
P q or P r button.
until all TV channels have been
button.
5
or
button.
CLEAR (CL)

Manual Channel Number Allocation

You can give any desired programme number to the TV
channels stored.
1
Switch on the TV set. Press the
the video recorder.
2
Select 'CHANNEL ALLOCATION' with the
button.
Confirm with the
3
Use the
P r
the TV screen to which you wish to give a programme
number (starting with 'P 01').
4
Confirm this allocation with the
If you wish to allocate further programme numbers, repeat
3
step and step
to all the required TV channels.
5
To end, press the
Note: If you want to delete an unwanted TV channel, press
the button at step
CLEAR (CL)
* Monitor function: You can switch to and fro between TV
reception and video recorder reception with the
button. This only functions when you used a scart
MONITOR
cable to connect the video recorder to your TV set and if
your TV set responds to this switch-over.
8
AUTOINSTALL
button.
OK
or button to select the TV channel on
P q
button.
OK
4
until you gave a programme number
STANDBY m button.
3
.
button on
or
P q P r