Inserting Batteries Into The Remote Control - Philips FW-C380 User Manual

D
Connecting other equipment to your
system
You can connect the audio left and right OUT
terminals of a TV, VCR, Laser Disc player, DVD
player or CD Recorder to the AUX IN terminals
at the rear of the system.
E
Subwoofer Out Connection
Connect the optional active subwoofer to the
SUBWOOFER OUT terminal. The subwoofer
reproduces just the low bass sound effect (e.g.
explosions, the rumble of spaceships, etc.). Be
sure to follow the instructions supplied with the
subwoofer.
F
Digital Out Connection
You can record the digital sound from the CD,
through this output, on any audio equipment
with digital input (e.g. CD Recorder, Digital Audio
Tape (DAT) deck, Digital to Analog Converter
and Digital Signal Processor).
Connect one end of the cinch cable (not
supplied) to the DIGITAL OUT socket and the
other end to the audio equipment with digital
input. When connecting the cinch cable, make
sure it is fully inserted.
G
AC Power Supply
After all other connections have been made,
connect the AC power cord to the system and
to the wall outlet.Inserting batteries into the
Remote Control
pg 01-30/C380/22-Eng
Inserting batteries into the
Remote Control
¶ Insert the batteries (not supplied) into the
remote control as shown in the battery
compartment (Type R06 or AA).
CAUTION
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
9
Preparation
3139 115 20641
12/7/00, 3:42 PM
9