Screen Saver; Speaker Setup; D.r.c; Downmix - Philips DVD733 User Manual

Setup Menu

Screen Saver

This function is used to turn on or off the screen
saver.
1
Press 34 keys to select the SCR SAVER in the
General Setup menu and press OK to confirm.
2
Enter the submenu by pressing the 2 key.
3
Use the 34 keys to highlight an option.
ON: At stop mode, screen saver will turn on
within 5-6 minutes.
OFF: Screen is disable.
4
Press OK and press 1 key to return to General
Setup menu.

Speaker setup

This menu contains setup options of your
speaker system, such as DOWNMIX and D.R.C
(Dynamic Range Compression).
1
Press SYSTEM MENU to enter the Setup menu.
2
Press 34 keys to choose SPEAKER SETUP
menu.
3
Press OK to confirm selection.
Setting for SPEAKER SETUP menu appears
on the TV screen.
4
To exit to default screen, select MAIN PAGE.
DOWNMIX mode
1
Press 34 keys to select the DOWNMIX in the
Speaker Setup menu and press OK to confirm.
2
Enter the submenu by pressing the 2 key.
3
Use the 34 keys to highlight an option.
18
STEREO: This setting will downmix the signal
of Dolby Digital into stereo signals directly
output from L/R connector.
LT/RT: Select this settings when the DVD
player is connected to a Dolby Pro Logic
decoder which send a signal output from the
DVD player.
4
Press OK and press 1 key to return to Speaker
Setup menu.
D.R.C (Dynamic Range
Compression)
To optimised the dynamic sound output. High
volume outputs are softened, enabling you to
watch your favourite action movie without
disturbing others.
1
Press 34 keys to select the D.R.C. in the
Speaker Setup menu and press OK to confirm.
2
Enter the submenu by pressing the 2 key.
3
Use the 34 keys to highlight an option.
ON: Enable D.R.C.
OFF: Disable D.R.C.
4
Press OK and press 1 key to return to Speaker
Setup menu.

SPDIF setup

1
Press SYSTEM MENU to enter the Setup menu.
2
Press 34 keys to choose SPDIF SETUP menu.
3
Press OK to confirm selection.
Setting for SPDIF setup menu appears on the
TV screen.
4
To exit to default screen, select MAIN PAGE.
Note:
– SPDIF is the abbreviation of Sony Philips
Digital Interface which is a protocol of digital data
transfering.
3139 246 11941