AMD Radeon HD 6500 Series User Manual page 24

18 AMD CrossFireX™ Technology
4. Remove any unneeded graphics cards from the computer.
5. Locate the PCIe slots on the motherboard. If necessary, also remove the
corresponding back panel cover.
6. Align the new graphics card in the secondary PCIe slot next to the
existing graphics card and press firmly until the card is fully seated.
7. Connect the power supply to the cards.
Tip: The location of power connections may vary between models. They can
be located on either the side or back of the card.
AMD Radeon™ HD 6500/6600 Series
Caution:
Remember to discharge your body's static electricity by touching the power
supply case or the metal surface of the computer chassis.
Warning:
Some graphics cards can get hot while operating. Wait approximately five
minutes after turning off the computer before touching the card.
© 2011 Advanced Micro Devices, Inc.