Gigabyte GA-H55M-UD2H User Manual page 84

B. S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
S/PDIF Optical Cable
Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
On the Digital Output(Optical) j screen
and bit depth. Click OK to complete.
Enter the Digital Output(Optical) j screen to configure further settings if you use the S/PDIF Out
(Note)
connector(s) on the back panel for digital audio output or enter the Digital Output screen if you use
the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
Only for GA-H55M-UD2H
j
Appendix
, click the Default Format tab and then select the sample rate
(Note)
- 84 -