Gigabyte GA-H55M-UD2H User Manual page 41

 Advanced Memory Settings
Extreme Memory Profile (X.M.P.)
System Memory Multiplier
Memory Frequency (Mhz)
Performance Enhance
DRAM Timing Selectable
Profile DDR Voltage
Profile QPI Voltage
>>>>> Channel A
 Channel A Timing Settings
>>>>> Channel B
 Channel B Timing Settings
higf : Move Enter: Select
F5: Previous Values
Extreme Memory Profile (X.M.P.)
Memory Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Ad-
vanced Frequency Settings menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard
Turbo
Extreme
DRAM Timing Selectable (SPD)
Quick and Expert allows the memory timing items to be configurable. Options are: Auto (default), Quick,
Expert.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this
item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this
item will display the value based on the SPD data on the XMP memory.
Profile QPI Voltage
The value displayed here is dependent on the CPU being used.
(Note ) This item appears only if you install a memory module that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Memory Settings
(Note)
(SPD)
1333
(SPD)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
Lets the system operate at its basic performance level.
Lets the system operate at its good performance level. (Default)
Lets the system operate at its best performance level.
[Disabled]
[Auto]
1333
[Turbo]
[Auto]
1.5V
1.1V
[Press Enter]
[Press Enter]
F10: Save
, System Memory Multiplier (SPD),
- 41 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup