Gigabyte GA-970A-D3 User Manual page 36

1T/2T Command Timing
Options are: Auto (default), 1T, 2T.
CAS# latency
Options are: Auto (default), 5T~14T.
RAS to CAS R/W Delay
Options are: Auto (default), 2T~19T.
Row Precharge Time
Options are: Auto (default), 2T~19T.
Minimum RAS Active Time
Options are: Auto (default), 8T~40T.
TwTr Command Delay
Options are: Auto (default), 4T~9T.
Trfc1 for DIMM1, DIMM3
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc0 for DIMM2, DIMM4
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~8T, 10T, 12T, 14T, 16T.
Precharge Time
Options are: Auto (default), 4T~10T.
Row Cycle Time
Options are: Auto (default), 10T~56T.
RAS to RAS Delay
Options are: Auto (default), 1T~9T.
** DCTs Drive Strength **
ProcOdt(ohms)
Options are: Auto (default), 240 ohms, 120 ohms, 80 ohms, 60 ohms.
DQS Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Data Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
MEMCLK Drive Strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Addr/Cmd Drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CS/ODT Drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CKE Drive Strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
BIOS Setup - 36 -