Gigabyte GA-970A-D3 User Manual page 11

Internal 1 x 24-pin ATX main power connector
Š
Connectors
1 x 8-pin ATX 12V power connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
2 x system fan headers
Š
1 x power fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
3 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x Trusted Platform Module (TPM) header
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors
1 x optical S/PDIF Out connector
Š
8 x USB 2.0/1.1 ports
Š
2 x USB 3.0/2.0 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Š
Out/Line In/Line Out/Microphone)
I/O Controller iTE I/O Controller Chip
Š
Hardware System voltage detection
Š
Monitor CPU/System temperature detection
Š
CPU/System/Power fan speed detection
Š
CPU overheating warning
Š
CPU/System/Power fan fail warning
Š
CPU/System fan speed control
Š
* Whether the CPU/system fan speed control function is supported will depend on
BIOS 2 x 32 Mbit flash
Š
Use of licensed AWARD BIOS
Š
Support for DualBIOS
Š
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Š
the CPU/system cooler you install.
™
- 11 - Hardware Installation