Gigabyte GA-770TA-UD3 User Manual page 39

Advanced Clock Calibration
EC Firmware Selection
Advanced Clock Calibration
x Value (All Cores)
x Value (Core 0)
x Value (Core 1)
x Value (Core 2)
x Value (Core 3)
CPU core Control
x CPU core 2
(Note)
x CPU core 3
(Note)
higf : Move Enter: Select
F5: Previous Values
EC Firmware Selection
Allows you to select the EC firmware version when Advanced Clock Calibration is enabled. After the
selection, select Save & Exit Setup in the BIOS Main Menu and then press <Y>. A message which says
"BIOS Is Updating EC Firmware!!! Don't Turn Off Or Reset System" will appear. Wait for a few seconds
and the system will automatically restart for the settings to take effect.
Normal
Hybrid
Advanced Clock Calibration
Allows you to determine whether to enable Advanced Clock Calibration when using an AMD Black Edi-
tion CPU.
Disabled
Auto
All Cores
Per Core
Value (All Cores)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%.
Value (Core 0), Value (Core 1), Value (Core 2), Value (Core 3)
This option is configurable only when Advanced Clock Calibration is set to All Cores.
Options are: -12%~+12%.
CPU core Control
Allows you to determine whether to manually enable/disable CPU Core 2 and Core 3. Manual allows the
two items below to be configurable. Options are: Auto (default), Manual.
Auto
Manual
(Note) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Uses the standard AMD EC firmware version. (Default)
Uses the specific AMD EC firmware version.
Disables this function. (Default)
Lets the BIOS to configure the settings to defaults.
Configures Advanced Clock Calibration for all CPU cores.
Individually configures Advanced Clock Calibration for each CPU core.
Lets the BIOS to enable all CPU cores (number of cores available depends on the
CPU being used).
Allows you to individually enable/disable CPU Core 2 and Core 3.
[Normal]
[Disabled]
-2%
-2%
-2%
-2%
-2%
[Auto]
Enabled
Enabled
F10: Save
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup