Gigabyte GA-M61PME-S2 User Manual page 34

The following fields display your hard drive specifications. If you wish to enter the parameters
manually, refer to the information on the hard drive.
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Drive A
Allows you to selects the type of floppy disk drive installed in your system. If you do not install a
floppy disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5",
1.44M/3.5", 2.88M/3.5".
Floppy 3 Mode Support
Allows you to specify whether the installed floppy disk drive is 3-mode floppy disk drive, a
Japanese standard floppy disk drive. Options are: Disabled (default), Drive A.
Halt on
Allows you to determine whether the system will stop for an error during the POST.
No Errors
All Errors
All, But Keyboard The system boot will not stop for a keyboard error but stop for all other
All, But Diskette
All, But Disk/Key
Memory
These fields are read-only and are determined by the BIOS POST.
Base Memory
Extended Memory The amount of extended memory.
GA-M61PME-S2 Motherboard
Approximate capacity of the currently installed hard drive.
Number of cylinders.
Number of heads.
Write precompensation cylinder.
Landing zone.
Number of sectors.
The system boot will not stop for any error.
Whenever the BIOS detects a non-fatal error the system boot will stop.
errors. (Default)
The system boot will not stop for a floppy disk drive error but stop for all
other errors.
The system boot will not stop for a keyboard or a floppy disk drive error but
it will stop for all other errors.
Also called conventional memory. Typically, 640 KB will be reserved for
the MS-DOS operating system.
- 34 -