Parallel Port - Gigabyte GA-8ICMT User Manual

GA-8ICMT Motherboard
Serial Port A
This allows users to configure serial prot A by using this option.
Disabled Disable the configuration.
Enabled Enable the configuration (Default value)
Base I/O Address
3F8 Set IO address to 3F8. (Default value)
2F8 Set IO address to 2F8.
3E8 Set IO address to 3E8.
2E8 Set IO address to 2E8.
Interrupt
IRQ4 Set interrupt as IRQ4. (Default value)
IRQ3 Set interrupt as IRQ3.

Parallel Port

This allows users to configure parallel port by using this option.
Disabled
Enabled
Mode
This option allows user to set Parallel Port transfer mode.
EPP
Bi-directional
ECP
Base I/O Address
378 Set IO address to 378
278 Set IO address to 278.
Disable the configuration.
Enable the configuration. (Default value)
Using Parallel port as Enhanced Parallel Port.
Use this setting to support bi-directional transfers on the parallel port.
(Default value)
Using Parallel port as Extended Capabilities Port.
3 6