Enabling The Dolby Home Theater Function - Gigabyte GA-890GPA-UD3H User Manual

5-2-3 Enabling the Dolby Home Theater Function

Before Dolby Home Theater is enabled, you get only 2-channel playback output (from the
front speakers) when playing 2-channel stereo sources. You must play 4-, 5.1-, or 7.1- chan-
nel content to get 4-, 5.1-, or 7.1- channel audio effects. With Dolby Home Theater enabled,
2-channel stereo content will be transformed into multi-channel audio, creating a virtual sur-
round sound environment
Install the Dolby GUI Software driver from the motherboard driver disk. Click the Start icon
Programs, Dolby Control Center to access the utility.
(The following illustration demonstrates a 7.1-speaker configuration as an example.)
1.
Click Dolby Pro Logic IIx. The system will expand 2-channel audio for a 7.1-channel surround sound
playback.
2.
Click Natural Bass to enable speaker bass effect.
(Note) When Dolby Digital Live is enabled, only digital audio output (S/PDIF) is working, and you will not
hear any sound from analog speakers or headphone.
Appendix
.
(Note)
:
:
- 106 -
. Point to All