Gigabyte GA-6VTXD User Manual page 58

6VTXD Motherboard
IDE1 Conductor Cable
Auto Will be automatically detected by BIOS. (Default Value)
ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE
device and cable is compatible with ATA66/100).
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default Value)
ATA66/100 Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE
device and cable is compatible with ATA66/100).
ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
OnBoard FDC
Disabled Disable this function.
Enabled Enable on board floppy disk controller.
Auto Set the floppy disk controller automatically. (Default Value)
OnBoard Serial Port 1
Auto BIOS will automatically setup the port 1 address. (Default Value)
3F8/COM1 Enable OnBoard Serial port 1 and address is 3F8.
2F8/COM2 Enable OnBoard Serial port 1 and address is 2F8.
3E8/COM3 Enable OnBoard Serial port 1 and address is 3E8.
2E8/COM4 Enable OnBoard Serial port 1 and address is 2E8.
Disabled Disable OnBoard Serial port 1.
OnBoard Serial Port 2
Auto BIOS will automatically setup the port 2 address. (Default Value)
3F8/COM1 Enable OnBoard Serial port 2 and address is 3F8.
2F8/COM2 Enable OnBoard Serial port 2 and address is 2F8.
3E8/COM3 Enable OnBoard Serial port 2 and address is 3E8.
2E8/COM4 Enable OnBoard Serial port 2 and address is 2E8.
Disabled Disable OnBoard Serial port 2.
51