Epson LQ-2080 User Manual page 123

2. To select a font, press the Font button until the two Font lights
indicate the font you want as shown below.
Font lights
n = On, o = Off
* other means the font selected in the
default-setting mode
Note:
You cannot use the Font button to directly select OCR-B, Orator,
Orator-S, Script C, Roman T, or Sans Serif H. To select one of these
fonts, you must first use the default-setting mode to register it as
the "other" font. The default "other" setting is Roman T. For
instruction on using the default-setting mode, see "About Your
Printer's Default Settings" on the next page.
3. Press the Condensed button to turn the condensed mode on
or off. The table below shows normal and condensed printing.
Condensed mode
Off
On
Changing Printer Settings From the Printer's Control Panel
Font
Draft
o o n
Roman
o n o
Sans Serif
o n n
Courier
n o o
Prestige
n o n
Script
n n o
Other
n n n
Sample
5
5-3