Technical Specifications; Installation; Positioning - Electrolux EC 5109N Instruction Book

Technical Specifications

Installation

Positioning

Place the freezer horizontally on a firm surface,
resting on all four feet.
similar object to compensate for any bumps/holes in
the floor's surface.
The room should be dry and adequately ventilated.
If the room temperature exceeds 32
freezing point, the freezer will not function as it
should.
Do not place the freezer close to sources of heat,
radiators, chimneys, etc. and do not place the
freezer in direct sunlight.
If the freezer has been handled standing on end, it
should be allowed to stand in the normal position for
about 12 hours before switching it on.
Ensure that the appliance is installed where it is
easily accessible for the engineer in the event of a
breakdown.
Use a wooden block or
o
C, or falls below
12