Introduction Features; Installation - Daewoo DTT-3250-100D Instruction Manual

Table of Contents

Advertisement

INTRODUCTION
Features
4:3 Screen : You can select a desired 4:3 screen mode as well as the most wide picture mode.
Selectable picture and selectable sound : Allows one-touch selection of your favorite picture
quality and tone quality.
On-timer: Turns on the TV automatically at a preset time.
Teletext
INTRODUCTION

Installation

AFTER MOVING THE SET
If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for
at least 15minutes in order to take out a colour stain on the screen.
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Press down the battery compartment grip and slide the cover. Insert the batteries supplied(two 1.5V,
type AAA).
Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
Used batteries should be disposed of properly.
AERIAL CONNECTION
For better picture and sound quality, an effective aerial installation is the most important.
If you are located in a relatively strong area, you will be able to use the indoor aerial.
When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.
MAINS CONNECTION
Plug the mains cable into the power socket with 220-240V AC, 50Hz.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtt-3250gb-100dDtt-3250k-100d

Table of Contents