Clock/Counter Display, Remaining Time And Cassette Length, Accessing Counter Zero Position, Resetting The Counter To Zero - Telefunken TVCR610 Instructions For Use Manual

M O R E
f u n c t i o n s
2
1 3 TV/VCR
4 5 6
AV
7 8 9 A
30 0
EJECT
SP/LP PR MENU
PAL/SEC
INDEX PR A.SEL
14
The counter counts in real time from the point you load the cassette. This does not
have to be its beginning! The counter does not count unrecorded parts of the tape.
If you rewind beyond the zero position, the counter counts in negative values
(e.g. – 0:01:15).
Clock / counter display
STOP SP PR01
STEREO ON
14:00 10/04
Remaining time and cassette length
Call the video's "MAIN MENU", choose "Tape Control".
TAPE CONTROL
E-180
TAPE REMAIN
E-240
GO TO ZERO
E-300
COUNTER RESET
PR+/-:SELECT PR+/-:SELECT
OK:CONFIRM MENU:END OK:CONFIRM
When you want the video to show the time remaining from the current video
tape position (to find out if there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette
currently loaded by selecting this function until you reach the correct length.
Remaining time display is only possible when the cassette is loaded.
Accessing counter zero position
REW SP
GO TO ZERO
0:02:13
Resetting the counter to zero
COUNTER RESET
1x: Time and date+current
ARD
status Time and date
2x: Counter+current status
counter
3x: disappear
If didn't wind tape (PLAY, FF, REW,...), it
doesn't appear the tape remain time.
TAPE REMAIN
MENU:END
The video will wind to the
position 0:00:00 and stop.
Reset the counter.
E-240 01:27