Timer Review - Changing And Erasing, Setting Time And Date - Telefunken TVCR610 Instructions For Use Manual

Timer Review – changing and erasing
MENU
TIMER PROGRAM
PR START END
03 21:20 22:20
01 18:30 20:20
-- -- : -- -- : --
-- -- : -- -- : --
-- -- : -- -- : --
-- -- : -- -- : --
-- -- : -- -- : --
-- -- : -- -- : --
PR+/-:SELECT
OK:CONFIRM
TIMER PROGRAM (ONCE)
PR
2
1 3
START TIME 21:20
PR MENU
4 5 6
END TIME
START DATE 14/04(SAT)
7 8 9
TAPE SPEED
PR
0
0 :ERASE
/ :CORRECT MENU:END
MENU
Setting time and date
CLOCK SET
MENU
TIME - - : - -
DATE - - / - - /- - - -
PR
2x
0-9:SETUP (HOUR)
/ :CORRECT MENU:END
2x
CLOCK SET
TIME 06:05
DATE 10/04/2001(TUE)
1 2
3
4 5 6
0-9:SETUP (HOUR)
/ :CORRECT
7 8 9
OK:CONFIRM
0
MENU
DATE
Call the video's "MAIN MENU",
14/04
12/04
choose "Timer Program".
-- / --
-- / --
-- / --
-- / --
-- / --
-- / --
Select the programming to change or erase.
MENU:END
If you want to erase this programming press
button 0, confirm with OK.
If you wish to make changes:
03
Move to the position you want to change using
22:20
the / buttons.
SP
Change the settings using the PR +/– or number
buttons.
If all setting are ok, press
"OK: CONFIRM" in the bottom line.
Confirm changes with OK. Exit the menus.
Call the video's "MAIN MENU",
choose "VCR Setup", then "Clock Set".
Move to the position you want to change and type
in the new values.
Wait a few seconds after typing a one-digit number.
MENU:END
Store with OK button and exit with MENU button.
M O R
f u n c t i o n s
or , till you see
E
13