INSTALLATION IN STRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
•
Do not place or store your washer below 0
•
Install the washer on the horizontal solid floor.
C
A
A
UP
DOWN
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose the washer.
Non-Pump Model
• Connect the drain hose to the drain outlet
at the back of the washer.
NOTES
• The opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
˚
C (32
If the washer is installed on an unsuitable floor, it could
make considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
•Earthed electrical outlet(B) is required with 20cm of
B
bottom back of washer cabinet.
•Hot and cold water faucets (C) must be within 1M of the
upper back of the washer cabinet and provide water
pressure 0.3kgf/cm
Drain hose
˚
F) to avoid any damage from freezing.
2
-8kgf/cm
2
(29.4kPa-784.5kPa).
Pump Model
• Connect the drain hose to the drain outlet
at the back of the washing machine.
Drain hose
4
Drain Outlet