Scart Socket - Daewoo GB14H3T2 Instruction Manual

Connections and
ASSEMBLING

Scart socket

This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD.
In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode.
If not, press the AV button on the remote controller.
The AV will be displayed on the screen with the current programme number.
In AV mode, you can change the TV programme number with the VW buttons or the Number buttons 0~9.
You must turn the external equipment off to return to the TV mode or press the
PIN Signal Designation
1 Audio Out (linked with 3)
2 Audio In (linked with 6)
3 Audio Out (linked with 1)
4 Audio earth
5 BIue earth
6 Audio In (linked with 2)
7 Blue In
8 Slow (Function) Switching
9 Green earth
10 NC
11 Green In
12 NC
13 Red earch
14 NC
15 Red In
16 Rapid Blanking Switching
17 Video earth
18 Rapid Blanking Earth
19 Video Out
20 Video In
21 Common earth
In SCART Slow SW mode, when you insert the tape without tab, it will playback.
But, in SCART Fast SW mode, when you insert the tape without tab, it will not playback and only load.
If you insert the SCART plug in playback status it will change to scart mode and VCR will revert to stop
mode.
18
Matching Values
0.5Vrms, lmp < 1k (RF 60% MOD)
0.5Vrms, lmp > 10k
0.5Vrms, lmp < 1k (RF 60% MOD)
0.5Vrms, lmp > 10k
0.7Vpp + 3dB, lmp 75
TV : 0-2V, PERI : 9.5-12V, lmp > 10k
0.7Vpp + 3dB, lmp 75
0.7Vpp + 3dB, lmp 75
Logic 0:0-0.4V, Logic 1:1-3V, lmp 75
1Vpp + 3dB, lmp 75
1Vpp + 3dB, lmp 75
button.