Table of Contents
Advertisement
About AVC
This function performs an Automatic Volume Control Function. The
sound signal conditions coming out of TV stations are different from each
other. Some signals are intense and other not. When the AVC is on, uni-
form sound can be ensured regardless of the conditions of TV station.
Setting "SURROUND" function
You can hear surround sound when stereo broadcasting is receiving or external input sound is stereo.
1 With the TV turned on, press the MENU button until "SOUND" menu will be displayed.
2 Use the V V CHW W buttons select "SURROUND" item.
3 Use the CVOLB buttons turn on/off the function.
Adjust Bass or Treble
1 With the TV turned on, press the MENU button until, "SOUND" menu will be displayed.
2 Use the V V CHW W buttons select "Bass or Treble" item.
3 Press the CVOLB buttons to adjust the level.
Selection
Bass
Treble
Adjusting the Balance
1 With the TV turned on, press the MENU button until "Sound" menu will be displayed.
2 Use the V V CHW W buttons select "Balance" item.
3 Press the VOLB button to decrease the left speaker volume.
4 Press the CVOL button to decrease the right speaker volume.
5 Press the MENU button twice or wait few seconds to return to normal TV viewing.
6 Your setting will remain intact until you change it. Your TV will then automatically reproduce either
stereo or monaural sound, whichever is broadcast.
Pressing
CVOL
VOLB
Lower(-)
Higher(+)
Lower(+)
Higher(-)
Remark
Control the level of low tone components of the sound
Control the level of high tone components of the sound
Chapter 6 : Adjusting the Sound
25
Advertisement
Table of Contents
