THE FUNCTIONS OF THE CONTROL PANEL
Control panel has micom sensor.
As the buttons are pressed, the lamps indicating the selection of your desired washing program will light up.
• Press this switch to turn the power on or off.
• It can be used to choose water temperature to be supplied.
• As the button is pressed, water temperature will be repeated.
COLD
COLD+HOT
•
In case of the single valve model, there is no wash temperature
selector function.
•
It can be used to adjust amount of water according to the size of the
load to be washed.
•
As the button is pressed, water level is selected by
MID
HIGH
LOW
•
It can be used to cancel the full-automatic program.
•
When the button is pressed, the display will light down.
If you want to wash, rinse or spin, you can press one of the buttons.
•
It can be used to pre-engage time for wash.
•
It can be used to select the full-automatic program.
•
As the button pressed, it will selected by following order:
FUZZY
HEAVY
•
It can be used to adjust washing time.
•
As the button is pressed, it will repeat.
12
6 MIN
9
•
It can be used to adjust rinse times.
•
As the button is pressed, it will repeat.
•
1 TIME
2
3
•
It can be used to adjust spin time.
•
As the button is pressed, it will repeat. 1MIN
• Operation and temporary stop are repeated as they are pressed.
• When you want to change program in operating;
press the "START/HOLD" button
want to change
HOT
SUIT(WOOL)
BLANKET
15
18
SOAK
4
5
Select the program that you
press the "START/HOLD" button again.
8
SPEEDY
3
5
7
9