Operating Instructions; Control Panel - GE GSG210IAPC Use And Care Manual

Optical Sensor in the top center of the panel senses
the surrounding light. When it is dark (night), Silent
Mode starts. Refrigerator works in minimum operating
condition, so it makes less working noise.
[Notice] Do not let the Optical Sensor covered by
memo sheet or other objects.
It shows that the digital control system is working.
(The icon is always on while the refrigerator is
working.)
As long as the refrigerator is working
deodorization is always on.
For your convenience you can select WATER /
CUBED ICE or CRUSHED ICE.
A rectangle line around the icon lights up to
indicate your selection is ON.
To obtain water or ice, push the pad smoothly with
your cup and your selection will come out 1~2
seconds later.
- Try to avoid placing the rim of your glass near the
bottom of the pad, otherwise Water or Icecubes may
spill or splash.
- You will hear a snap sound 2 seconds after the
icecubes come out. This is from the shut off ice-out
valve.
- Wait 2~3 seconds after pushing the pad to get
all the available water or ice cubes.
• Interior lights of refrigerator will turn off when the doors are open for more than 10 minutes.
• In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with 1
minute interval.
LCD Background Light
The LCD light is turned ON
• When refrigerator is plugged in.
• When you push a button (The background light is ON first, then button mode is activated.)
• When you open the door.
If you push button when the backlight is OFF, only the backlight is turned ON. It does not affect any other button mode.
The LCD light is turned OFF
• 1 minute after power plug in.
• 10 seconds after door is closed.
• No other button is pushed for more than 1 minute after button selection.
When you look at LCD display from side or down not from front, the display (letters icons signs) may look faded or dim.
6

OPERATING INSTRUCTIONS

CONTROL PANEL

* Panel of MG/MH model shown. Actual buttons and display is model - dependent.
WATER CUBED ICE CRUSHED ICE
Children may push any button on the panel for fun,
resulting in disorder of temperature and function of
refrigerator. Press this button to lock the
temperature and function setting. When you want
to stop the mode, push this button again for more
than a second.
In case of heavy load of foods or frequent door
openings, Speed Mode starts automatically to
maintain optimal condition of temperature. It is an
automatic function.
This refrigerator runs quietly, but if you want a
silent environment at night, just push this button.
This mode works for maximum 12 hours and then
it returns to the previously set mode automatically.
When you want to stop the mode, just push the
button again and it also returns to the previously
set mode.
The NORMAL (Green LED) is ON for 6 months after
the first installation of refrigerator.
- When the time comes to change the filter or RESET,
press the [ICE MAKER LOCK] for 3 seconds or
more while pressing the [LOCK] button, then the
LED will change to NORMAL(Green).
Press this button to stop ice-making function.