Watching Two Pictures Simultaneously - Daewoo DPP-42A2(GDBD) User Manual

Watching Two Pictures Simultaneously

• PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously.
Screen Adjustment
of the Sub-picture
• Alpha Blend of the
sub-picture can be
adjusted on Screen
Menu of OSD.
• Alpha Blend is only
available in PIP mode.
Alpha Blend
The adjustment of alpha
blend allows the sub-
picture to be translucent.
The translucent rate is
controlled with " "
buttons.
52
1
Engaging PIP mode
• Press the 'PIP' button once on the remote control to engage
• By pressing the button repeatedly, it will show the following
• If switched to P-by-P (Picture-by-Picture) mode, the screen
2
Position of the Sub-picture
• When PIP mode is engaged, the sub-picture can be displayed in
one of the four corners by using 'POSITION' button.
• Whenever pressing the button, the sub-picture will be cycling in
the following order.
• If you would like to move the sub-picture to specific position you
desire, use navigation keys.
3
Swap the pictures
• In order to swap between the main picture and sub-picture,
press the 'SWAP' button.
the Picture-in-Picture mode.
cycle.
will be split in half. The screen on the left side is the main
picture, and the sub-picture will be on the right of the screen.
PIP
Main Main
Sub
<Using 'Position' button>
Main Main
Sub Sub
Main Sub
Sub
Main
P-by-P
Main Sub
<Using "CB" and
"WV" button>
Sub