Time Defrosting; Cooking In One Stage - Magic Chef MCM1290A User Manual

TIME DEFROSTING

When TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods of
alternating defrost and stand times by cycling on and off.
AUTO
1. Touch pad.
DEF.
AUTO
2. Touch pad once more.
DEF.
3. Touch
1 2 3
4 5 6
7 8 9
0
pads, for the desired defrosting time.
4. Touch pad.
START

COOKING IN ONE STAGE

Power
1. Touch pad.
2. Touch
1 2 3
4 5 6
7 8 9
0
pad for desired power level.
3. Touch number pads for the cooking time.
START
4. Touch pad.
NOTE: Using lower power levels increases the cooking time which is recommended for foods such as
cheese, milk and slow cooking of meats.
The WEIGHT DEFROST indicator lights and "0.0" is displayed
and the g indicator starts blinking.
The TIME DEFROST indicator lights and ":0" is displayed.
The display will show the numbers you pressed in the order
you touched.
When you touch START pad, the TIME DEFROST indicator
starts blinking to show the oven is in the TIME DEFROST
mode.The display counts down the time to show you how
much defrosting time is left in the TIME DEFROST mode. The
oven beeps during the defrosting cycle to signal that the food
needs to be turned or rearranged. When the defrosting time
ends, you will hear 3 beeps.
The STAGE1 indicator lights and "P-" is displayed.
This display will show what you touched. This example shows
power level 3.
Note: If steps 1 and 2 are omitted, the oven will cook at full
power.
The display will show the numbers you pressed in the order
you touched.
Note: Your oven can be programmed for 59 minutes 99
seconds.(59:99)
When you touch START pad, the STAGE1 indicator starts
blinking to show the oven is cooking.
The display counts down the time to show how much cooking
time is left. When the cooking time ends, you will hear 3
beeps.
13