Auto Defrost - Magic Chef MCM7950SW Operating Instructions Manual

NOTE: 1. Any sensor cooking selection can be programmed with more or less time adjustment. In case of cooking more
food than the quantity listed in the chart, touch the POWER pad once after touching one of sensor cook menus
and before the oven beginning to start. In case of cooking less food, touch POWER pad twice.
2. If you touch the POWER pad during operation, the display shows the present power level and then returns to
the chosen menu.
3. Each menu has a cooking hint. Touch the Help pad before the oven starts operating and the display will show
the above mentioned user guides.
4. If "SENSOR PREHEAT ERROR1 PRESS CLEAR" is displayed with a beep sound while you choose the sensor
menu pad, turn off & on the oven and then try to use the oven again after 2 minutes. If there is still this error,
contact the qualified service man.
5. If "SENSOR PRESET ERROR3 PRESS CLEAR" is displayed with a beep sound during operation, turn off & on
the oven and then try to use the oven again after 2 minutes.

AUTO DEFROST

AUTO DEFROST lets you easily defrost food by eliminating guess work in determining defrosting time.
Follow the steps below for easy defrosting.
1. Touch the AUTO DEF. pad.
2. Touch the time set pad for the
food you want to defrost.
* AUTO DEFROST CHART
Auto Defrost menu
1. GROUND MEAT "GROUND MEAT -- ENTER WEIGHT IN LB"
2. ROAST "ROAST -- ENTER WEIGHT IN LB"
3. POULTRY "POULTRY -- ENTER WEIGHT IN LB"
4. FISH "FISH -- ENTER WEIGHT IN LB"
3. Touch the time set pad for
weight within the proper range.
(Please refer to the above
"User Guide")
4. Touch the START pad.
The DEFROST indicator appears and "AUTO
DEFROST 1-GROUND MEAT 2-ROAST 3-
POULTRY 4-FISH SELECT NUMBER" is
displayed in sequence. "NUMBER" blinks three
times.
The displays are as follows and "LB" blinks
three times.
Display User Guide (When touching Help pad)
"WEIGHT RANGE 0.5 TO 3.0 LB"
"WEIGHT RANGE 2.0 TO 3.5 LB"
"WEIGHT RANGE 1.0 TO 3.0 LB"
"WEIGHT RANGE 0.5 TO 1.5 LB"
The selected weight appears and "PRESS
START" is displayed. "START" blinks three
times.
NOTE: If you enter an incorrect weight out of
The chosen menu is displayed and the
DEFROST indicator starts blinking to show the
oven is in the defrost mode. Then the display is
changed into cooking time and counts down the
remaining time. When the defrosting time ends,
you will hear a beep.
10
range, "RANGE ERROR PRESS
CLEAR" is displayed with a beep
sound.