Controls; Setting The Clock; Weight Defrosting - Daewoo KOG-393R Operating Instructions Manual

CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash " :0" and a tone will sound. If the AC power
ever turns off, the display shows " :0" when the power comes back on.
1. Press Clock button.
Clock
2. Press Clock button once more.
This is a 24 hour clock system.
3. Turn the dial knob to adjust hour.
4. Press Clock button.
Clock
5. Turn the dial knob to adjust minute.
6. Press Clock button.
Clock
When you press Clock button, the minute stops blinking, and the colon starts blinking. If you selected 12 hour clock
system, this digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, this digital clock
allows you to set from 0:00 to 23:59.

WEIGHT DEFROSTING

WEIGHT DEFROST lets you easily defrost food by eliminating guesswork in determining defrosting
time. The minimum weight for WEIGHT DEFROST is 200 gram and the maximum weight is 3,000
gram. Follow the steps below for easy defrosting.
1. Press Power/Def. button.
Power/Def.
X 6
2. Turn the dial knob to adjust the defrosting weight.
3. Press Start button.
Start
When you press Start button, the g indicator disappears and the DEF. indicator starts blinking to show the
oven is in the DEFROST mode. The display counts down the time to show you how much defrosting time is
left in the DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be
turned or rearranged. When the defrosting time ends, you will hear 3 beeps.
This is a 12 hour clock system.
NOTE : This oven has multiple clock
systems. If you want 12 hour
clock system, omit this step.
If you selected 12 hour system, the display will
show the hours from "1" to "12".
If you selected 24 hour system, the display will
show the hours from "0" to "23".
The adjusted hour starts blinking.
The minute stops blinking and "00" starts blinking.
The display will show the minutes from "0" to "59".
The adjusted minute starts blinking.
The DEF. indicator & "0" appear and the g
indicator starts blinking.
The display will show what you selected.
8