Checking The Battery Level - Canon EOS Rebel Ti SERIES Instructions Manual

Checking the Battery Level

Check the battery level after replacing the batteries and before using the
camera.
Battery Life
Temperature
At 20˚C
At –10˚C
• The battery life shown in the table is based on the Canon's testing
conditions with new batteries.
• If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly. Take out the batteries and install correctly. (→page 14)
• Pressing the shutter button halfway for a prolonged period or operating only
the autofocus without taking a picture will still consume battery power. It will
reduce the number of rolls that can be taken with the batteries.
When not using the camera, set the Command Dial to <
Turn the Command Dial to a
shooting mode.
•
The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
0% Flash Use
67 rolls
44 rolls
: Battery level OK.
: The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
completely exhausted.
: Replace the batteries.
(→page 5)
50% Flash Use
30 rolls
20 rolls
(With 24-ex. rolls)
100% Flash Use
22 rolls
15 rolls
>.
15