Table of Contents
Advertisement
Caring for your LCD-PC
6.1
General Maintenance
The best maintenance is the preventive one. Keep the following in mi n d and perform the
maintenance at least once a month.
Cleaning The LCD-PC
Cleaning The Case
If the LCD-PC case becomes dirty, you can clean it. Always make sure that the LCD-PC is turned off
and the AC adapter is disconnected before you do anything else. You can clean the case with a soft,
preferably lint-free, cloth. If necessary, you may use mild detergent.
40
Keep the LCD-PC clean regularly.
Avoid transporting or using the computer in dirty or dusty environments. Use a clean container
when you transport the computer.
Avoid getting dirt and dust in the optical drive.
Avoid spilling liquids on the computer.
You can clean the keyboard with a small computer vacuum to remove dust buildup that can
impede key motion.
You can occasionally use a vacuum to clean the ports.
Make sure that the computer is turned off before unplugging it.
When you disconnect cords, remember to pull them by the plugs and not by the cords themselves.
This will prevent damage to the cords, plugs, ports, and jacks.
Perform system maintenance regularly. Windows provides tools for you to keep your LCD-PC
automatically.
Avoid any cleaner that contains abrasives, and DO NOT use cleaning solvents such as thinner,
benzene or isopropy1 alcohol-based products.
Never spray cleaner directly onto the computer.
Always spray the cleaner onto a cloth and then wipe the LCD-PC with the cloth. After cleaning,
allow 30 minutes drying time.
Advertisement
Table of Contents
