General Maintenance - Biostar iDEQ 210P Manual

Small form factor system
Table of Contents

Advertisement

6.1 General Maintenance

6.1 General Maintenance
6.1 General Maintenance
6.1 General Maintenance
6.1 General Maintenance
Before you install any computer component, we recommend
that you read the following instructions.
* Electrostatic discharge can damage the components of your computer. Do not remove a component
from its protective packaging until you are ready to install it.
* Avoid transporting or using your computer in dirty or dusty environments. Use a clean container when
you transport the computer.
* Avoid getting dirt and dust in the optical drive.
* Avoid spilling liquids on the computer.
* You can occasionally use a vacuum to clean the ports.
* Make sure that the computer is turned off before unplugging it.
* When you disconnect cords, remember to pull them by the plugs and not by the cords themselves. This
will prevent damage to the cords, plugs, ports, and jacks.
* Maintain your OS environment by doing scan disk, virus scan, and defragment regularly.
42

Advertisement

Table of Contents
loading

Table of Contents