Chapter 1 Messages And Output Destinations - NEC Storage Manager Messages Handbook

Chapter 1 Messages and Output Destinations

Chapter 1 Messages and Output
Destinations
The Storage Manager outputs the information, which is required for maintenance and operation of a disk array and
the Storage Manager, to log files of the console/terminal and the management server. The log files to which a
message is output are syslog, event log, and operation log. The message describes information that indicates
events to be reported to an administrator, such as system state transition, fault and error detection, and command
input results.
The ReplicationControl outputs the operation information of data replication in a message format, to the log files
of the console/terminal and the business server. The message is output to syslog, event log, and operation log.
The message describes the information for checking operating conditions, such as command execution results, and
fault and error detection information, etc.
If ESMPRO Agent has been installed in the management server on which the Storage Manager has started,
messages are output to ESMPRO Manager.
Figure 1-1 shows an overview of message output.
1