Chapter 2 Message List; Interpretation Of Message List; Message List; Appendix A Message Output Destination List - NEC Storage Manager Messages Handbook

Chapter 2 Message List

Chapter 2 Message List
2 . 1
2 . 1
2 . 1
2.2 "Message List" describes the messages in the order of message IDs. The message are described in
the following format:
iSMxxxxx: AAAAA<aaa>,<bbb...b>
Message ID (iSMxxxxx) and message body (AAAAA<aaa>,<bbb...b>) are described.
Descriptions using parentheses such as <aaa> and <bbb...b> indicate that parameter values are not fixed.
(The parentheses "<" and ">" are not displayed in the actual message.)
For details of parameter values, refer to [Explanation].
Messages subject to ALIVE report (including ALIVE report from a disk array) are followed by the
keyword [_ALERT_] and output to each destination. For messages subject to ALIVE report
excluding ALIVE report from a disk array, refer to Appendix A "Message Output Destination List".
[Classification]
[Explanation]
[Measure]
Note: For output destination of a message, refer to Appendix A "Message Output Destination List".
I n t e r p r e t a t
I n t e r p r e t a t
I n t e r p r e t a t
Message classification (ERROR, WARNING, NOTICE, or INFO) is described.
A message that is not output to syslog, event log, or operation log is output
without a message classification. This field is blank for such a message that is
output without a message classification.
This field describes the causes of the message output, etc. Parameters in the
message are also described in this field.
If a message is output on a specific OS (UNIX or Windows), applicable OS names
are described in this field. Unless otherwise noted, the message is a common
message that is independent of OS.
This field describes measures to be taken by an administrator. An administrator
must follow the instructions to take measures.
i o n o f M e s
i o n o f M e s
i o n o f M e s
8
s a g e L i s t
s a g e L i s t
s a g e L i s t