Table of Contents
Advertisement
3
Change the mode to
Cables
A HDMI cable (optional)
B Component cable
(supplied)
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] #
MENU
[4:3]
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
80
VQT3Q78
to play back.
≥ Connecting with a HDMI cable (l 81)
≥ Playback using VIERA Link
(l 82)
≥ Connecting with the component cable (l 81)
∫ To display the on-screen
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
desired setting
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
[4:3]
All information displayed
* This setting is only available in recording
mode.
≥ If the HDMI cable, component cable and
AV cable are connected at the same time,
output will be prioritized in order of the
HDMI cable, component cable and AV
cable.
Reference items
™
(HDAVI Control
information on the TV
: [SETUP] # [EXT. DISPLAY] #
MENU
™
)
Advertisement
Table of Contents
