Electromagnetic Susceptibility - Seagate Constellation ST9500622SS Product Manual

chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca-
nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any
electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
7.5.8

Electromagnetic susceptibility

See Section 3.1.1.1.
Constellation.2 SAS Product Manual, Rev. H 37