1054K07C.FM
28.10.96
Operation with Comfort Mobile Unit
Resetting the Base Station to the Status at Initialization
You can reset the base station to the initialization status, for example if you no longer have a clear
overview of your settings. In order to keep this as simple as possible, however, not all settings
are reset.
This procedure accomplishes the following:
a) Resets to
status at initialization:
System settings
1. In idle status, push the
ß
2. In the Service menu, select "System settings" and enter the system code
(see also page 115).
After the corrected system code has been
entered, the following menu appears:
(Entire menu at left)
Scroll through the menu with NEXT ...
until "Initialisation" is on the 1st line; then
Initialisation
select with OK.
The setting is displayed for 2 seconds.
Gigaset 1054, GBR: A30852-X954-B101-1-7619
b) Deletes:
Units / Charges
Emergency numbers
Restricted numbers
key and select "Service" from the main menu.
System Settings
c) Unchanged:
System code
Registration of mobile units
Ring allocation
Connection/operation type
of the system
System cd/Mn sys cd
Duration/Units
Call barring
NEXT
OK
Initialisation
completed
117