Commissioning The Simatic Box Pc 620; Unpacking And Checking The Scope Of Delivery - Siemens SIMATIC Box PC 620 Operating Manual

Commissioning the SIMATIC Box PC 620

2.1

Unpacking and Checking the Scope of Delivery

Unpacking the
SIMATIC Box PC 620
Unpack your SIMATIC Box PC 620 programming device as follows:
1. Remove the packing.
2. Do not throw the original packing away. Keep it in case you have to transport
the unit again sometime in the future.
3. Please keep the documentation in a safe place. It is required during the initial
start–up of the PC (see Section 5.2) and are part of the devicet.
4. Check the packing and its contents for any shipping or transport damage.
5. Check with the packing list to make sure no components are missing. Also
check the accessory parts, which you can order separately.
6. Please inform your local dealer of any shipping or transport damages and of
outstanding items indicated on the packing list.
Recording the Serial Number
7. Your PC is identified by a serial number (F-Nr.). Enter this number in the table
below.
If a PC is stolen and subsequently submitted for repair, the repair center will be
able to identify it by the F-Nr..
Enter the Microsoft Windows "Product Key" from the "Certificate of
Authenticity"
8. Enter the Microsoft Windows "Product Key" from the "Certificate of Authenticity"
(COA) in the table. You will find the "Product Key" on the Windows manual or
the device. You need the Windows "Product Key" if you want to reinstall the
operating system.
F-Nr.
Order No.
Microsoft Windows Product Key
SIMATIC Box PC 620 Operating Manual
C79000-Z7076-C638-04
2
2-1