Certificates, Directives And Declarations - Siemens SIMATIC Box PC 620 Operating Manual

1.2

Certificates, Directives and Declarations

Notes on the CE Symbol
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application apply
according to this CE symbol:
Field of Application
Residential and commercial areas
and small businesses.
Industry
The product is also compliant with the Standards EN 61000-3-2:1995 (Harmonic
currents) and EN 61000-3-3:1995 (Voltage fluctuation and flicker).
Low Voltage Directive
This product fulfils the requirements for the EC directive 73/23/EEC on "low
voltage" and was tested to EN60950
Declaration of Conformity
The EC declarations of conformity and the documentation relating to this are
available to the authorities concerned, according to the above EC directive, from:
Siemens AG
Bereich Automation & Drives
A&D AS E 4
Frau Zisler
Postfach 1963
D-92209 Amberg
Tel.: +49 (9621) 80-3283
Fax: +49 (9621) 80-3278
Observing the Setup Guidelines
The setup guidelines and notes on safety given in the manual must be observed
on startup and during operation.
SIMATIC Box PC 620 Operating Manual
C79000-Z7076-C638-04
The following applies to the SIMATIC product described in this
operating instruction:
Important Information
Requirement For
Emitted Interference
EN 50081-1: 1992 EN 50082-1: 1992
EN 50081-2: 1993 EN 50082-2: 1995
Noise Immunity
1-5